MeltingTogether overhauls any drum welder and their separate assemblies. We also provide parts & equipment for the resistance seam welding machine. Below you can find a list of items that we overhaul. If your part is not listed please contact us凤凰彩票代理

Complete drum welder
Forming roll
Weld wheel drive
Knurl house
Index of the weld wheels
Welding head
Weld controller
Cooling system
Pneumatic Install
Grease system
Electrical install


British Federal drum welding machine after overhaul
British Federal drum welding machine before overhaul



  • 1. The customer had this British Federal Welder in Spain from 1968. The welder was able to produce drums with a inner diameter of 571,5mm and it had to be rebuild to produce conical drums with a inner diameter of 520mm.
  • 2.The machine had among others the following issues: Forming of the sheet from 0.7 was not stable. The weld was not ok, problems with the starting of the weld (insulation problems).
  • 1. We provided a complete overhaul on our location in The Netherlands.
  • 2. Overhauling all critical parts (forming rolls, pusher, welding heads, ratchet, knurl houses and more).
  • 3. Engineered and built completely new hourglass section.
  • 4. Designed, build and programmed a whole new electrical-, pneumatic-, grease and cooling installation on the machine.
  • 5. Commissioning of the machine,  complete with documentation.


Forming rolls after overhaul
Forming rolls before refurbishment



  • 1. Customer wished to place his drum welder in another plant and therefore the input direction of the sheet in the forming rolls needed to be changed from left to right.
  • 2. Also required mechanical overhaul of the forming rolls.
  • 1. New drawings where made to change the infeed direction of the forming rolls.
  • 2. After measuring the forming roll system, we noticed that the alignment of the bearings of the upper and lower roll where not in line.
  • 3. We installed new components and carried out the overhaul. The alignment of the bearings was repaired. This is very important because otherwise you make a conical body.

Drum Welder Repair

凤凰彩票凤凰彩票下载app  11月10日,國家市場監督管理總局發布《關于平臺經濟領域的反壟斷指南(征求意見稿)》,提出營造公平競爭秩序的重要原則,旨在預防和制止平臺經濟領域壟斷行為  這也為螞蟻集團在金融科技領域的創新埋下了一枚種子

凤凰彩票官方网登录因此,機構在估值分析上更多采用與國際上同類型企業的對比”  《財經》記者從多名業內人士處了解到,包括度小滿金融、京東數科、360數科等,均有通過旗下網絡小貸公司開展聯合貸款業務

烽火电玩游戏中心但是螞蟻金服的強項是技術,與金融企業合作才能形成互補,所以,我們往后退半步回到tech的位置上,fin的東西少一點  作為對強監管的回應,螞蟻集團在“雙11”期間正式任命螞蟻集團副總裁李臣為集團合規負責人,直接向CEO胡曉明匯報工作

凤凰彩票兼职|华仔seo博客因此,部分網絡小貸公司以較低的注冊資本金撬動起過高的貸款規模,螞蟻集團亦是如此  同日,銀保監會官方微信發布《網絡小額貸款業務管理暫行辦法(征求意見稿)》公開征求意見(下稱《網絡小貸暫行辦法》),文件監管收緊的小貸業務正是螞蟻集團主營業務之一

Forming roll
Welding wheels drive
Weld head
Weld controller
Greasing system
Electrical and pneumatic install

Can I overhaul

分分钟彩票软件app  事實上,金融監管者前期已不斷釋放強監管信號螞蟻集團會深入落實約談意見,繼續沿著“穩妥創新、擁抱監管、服務實體、開放共贏”的十六字指導方針,繼續提升普惠服務能力,助力經濟和民生發展

Why choose

凤凰彩票可以报案”  業界普遍共識,其中所指的金融科技監管環境發生變化,即指頭一日銀保監會發布的《網絡小貸暫行辦法》,新規將極大地提升螞蟻集團微貸業務的合規成本,進而影響業務利潤前景及IPO估值的合理性”螞蟻集團業務的成長并不是絕對地對金融行業產生了巨大沖擊的成長,也形成了一種與銀行錯位發展的成長


  • Inquiry and Deal
    • A customer will enquire about overhauling a drum welding head.
      We ask customers to provide as much information as possible and to include drawings and dimensions along with the reason for the overhaul. This is so we can understand how to tackle the problem safely and easily.
    • We then take a complete measurement of the machine’s parts to provide us with the alignment settings we need.
      MeltingTogether offers not only physical and technical support, but also the design and production of an electrical, pneumatical system for your weld head drum welder.
    • We thoroughly investigate whether an overhaul is necessary so that we can avoid direct damage to the barrel welder.
      Sometimes, it may be better to fully refurbish the resistance drum welding machine, rather than attempting to overhaul specific components.
    • A quote for a full, extensive inspection is provided.
  • The Inspection

    凤凰彩票官网时时彩计划”文章進一步強調,“花唄”“白條”“任性付”等產品,其內核與銀行發行的信用卡沒有本質差別,“借唄”“金條”“微粒貸”等產品,與銀行提供的小額貸款無本質差別  在其牽頭完成的研究報告中,通過比較樣本發現,大科技信貸與規模小、信用歷史短的中小微企業的適配度更高

    凤凰彩票ios版下载安装  之后,螞蟻集團在官方微信發文《致投資者》表示:“對由此給投資者帶來的麻煩,螞蟻集團深表歉意  風起于青萍之末,相關的監管表態和行動,并非一夜之間忽然涌現

    • The part or machine is tested to understand its current status on arrival at our facility.
    • It is then dismantled and cleaned, before we compare its measurements to the drawings provided.
    • If drawings haven’t been provided, we will create these.
    • A complete, detailed inspection report is made and sent to the customer.
    • The report will feature information regarding the status of the machine or part when it arrived with us.
    • The findings of the inspection with measurements and pictures.
    • Possible improvements we would recommend.
    • We will also provide an estimate price for the overhaul and how long we predict it will take.
    • The inspection report can be provided remotely, or the customer can visit our facility to discuss the report in depth.
    • We then send the customer an invoice for the inspection report along with a quote for the overhaul.

    凤凰彩票标准版绿色”開展聯合貸款業務的某金融科技公司業務負責人告訴《財經》記者,新規主要會對不少底部玩家帶來致命打擊,對頭部公司來說,主要是限制了其發展規模  隨后,銀保監會消費者權益保護局局長郭武平撰文指出:“金融科技是技術驅動的金融創新,落腳點是金融,本質是金融服務

  • The overhaul
    • When the customer has agreed on the quote and placed the order, the overhaul begins.
    • A complete refurbishment is provided to the welding head drum machine at our headquarters in the Netherlands based on the previously created inspection report.
    • Parts and equipment of the refurbished drum welder are dismantled for cleaning and tested using both a visual inspection and functionality test to ensure your machine complies with our testing procedure.
    • After the overhaul, the machine can be collection from our headquarters. If the customer cannot collect, a shipment quote is provided.
    • We will provide complete documentation regarding the repair of your drum welder machine for you to keep. This documentation includes a before and after report, no matter if it is the whole machine or simply just a part.